Best Saw Fences At The Moment

Saw Fences

The frustration of feeding a board through a table saw only to have it wander off course and produce a less-than-straight cut is second to none. Although rip fences are typically included with table saws, the stock models frequently fall short of expectations. Consider upgrading from the standard fence to something more dependable if you’re sick of measuring the distance between your blades on the front and back every time you need to make an adjustment. In order to prevent your wood from catching, your fence needs to be smooth. Additionally, it must be exceedingly precise and secure. Every time you move it, there shouldn’t be any uncertainty or need to take measurements. While being used, the barrier must not move at all. Which barriers can meet these demands, then? The following 10 fences have received the highest ratings after we tested as many as we could discover.

Best Table Saw Fences

Vega U26 Table Saw Fence

The most sought-after table saw fence on the market is unquestionably the Vega U26. This system comes with the front and back rails for mounting the fence and is made to fit a range of different table saws. You have plenty of space to make rips of various sizes with a tear size of 26 inches to the right and 8 inches to the left. Although the U26 includes mounting choices, you might need to drill some new holes to place it on your model. The U26 can support a wide range of saws. Other than that, its slide is smooth and reliable, making it simple to secure precise cuts. Additionally, a fine-adjust is available for entering precise measurements. It’s really secure, and once the fence is locked in place, it won’t move. You can shave off as much distance as you wish without thinking about it.

Shop Fox W1410 Fence

A solid rip fence is crucial, but the best fence systems cost more than certain table saws available today! Consider the Shop Fox W1410 Fence with conventional rails if you don’t want to spend more on the accessories than the tool. The very reasonable pricing in comparison to competitors is the first thing you’ll notice, but this is a highly safe and sturdy unit that doesn’t feel in the least bit cheap. There should be enough room for the majority of cuts with a rip size of 25 inches to the right of the blade. Ball bearings are responsible for the extremely smooth rolling motion. You may adjust your distance with the use of precise placement knobs, and the handle clamps firmly enough to keep it steady through every board. Since there aren’t many possibilities with pre-drilled holes, you might need to drill your own mounting holes. Additionally, it won’t fit larger saws because it is only compatible with tables up to 27 inches in size.

Delta BC50T2 Saw Fence

For woodworkers who don’t care about price and who demand maximal rip capacity, there is the Delta BC50T2 fence and rail system. The rail system’s length is indicated by the term “50-inch.” Once mounted, this translates to a 34-inch right side rip and a 16-inch left side rip, which is a really amazing range. Of course, that flexibility will cost you. The price includes the cost of the elaborate Biesemeyer fence. This sturdy fence is constructed of steel and has a three-point locking system to keep it in place. It is made to extremely precise tolerances for a flawless slide.

Delta 36-T30T3 Table Saw Fence

One significant limitation of this excellent fence system from Delta Power Equipment is that it can only be used on a 27-inch table saw. It can be made to fit on the majority of 27-inch table saws, though you might need to drill a few new holes. The fence is easy to move, incredibly secure once latched, and won’t budge even after dozens of boards are ripped. This method features a measuring tape that extends over the entire surface and may be used on either side of the blade. There are two set screws that you may use to move it; ours initially lined up square.

Shop Fox W2005 Table Saw Fence

The Classic Fence with standard rails from Shop Fox is a very capable rip fence, albeit it is also quite expensive. It features smooth operation and a straightforward lift-off design. One-handed operation secures the cam-action lever’s lock. This fence system may be put on practically any table saw and is adaptable. With a 42-inch height, the barrier should accommodate most tables. Once mounted, the conventional rails permit a maximum rip to the right of the blade of 25 inches, which is sufficient for the majority of cuts. You’ll have to hunt for a fence system with longer rails if you require more. On our saw, the mounting holes lined up perfectly, although this can differ from model to model. You might need to drill a few additional mounting holes to make it fit.

Shop Fox W1716 57-Inch Fence

This Shop Fox fence has 57-inch rails, which allows for a 30-inch rip to the right of the blade. Its lone locking-cam lever enables one-handed adjustment and maintains a very solid grasp. When pruning, we didn’t notice any fence migration. This type is smooth-rolling for simple dial-in of accurate measurements. The installation was the only time there were issues. For the saw we were using, none of the holes lined up. This required us to drill each and every hole ourselves. It’s not a deal breaker, but some people could find it challenging.

DELTA BC30 30-Inch Fence

This Biesemeyer table saw fence system from Delta can be mounted on practically any table saw and has rip capacities of 30 inches to the right and 12 inches to the left. The fence is 42 inches long, which is plenty for even large table saws, while shallow models can also use it. This fence system’s price is one item to keep in mind because it is significantly costlier than most of its rivals. A few years ago, Biesemeyer was the industry leader in table saw fence systems, but it now appears that quality control may be deteriorating. The holes on the kit we received didn’t line up, so in order to install it, we had to drill new ones. The exterior margins of the fence are plywood, even though the fence is made of steel. We had hoped for something a little more upscale given the pricing.

Shop Fox W1720 Aluma-Classic Fence

The Shop Fox W1720 boasts a 50-inch cut to the right of the blade, thanks to the long 79-inch rails, for greatest rip capacity without paying top bucks. Thankfully, accompanying leg stands support the lengthy rails. However, we discovered that they were a little too short for our saw, rendering them useless. That’s unquestionably a negative. You definitely need that support, especially if you intend to use the entire 50-inch rip capacity because this is made worse by the fact that the rails are a little thin. The W1720 is a robust piece that works with the majority of table saws. To view your measurements clearly for precise positioning, the cursor is magnified. For fresh cuts, the one-hand locking lever makes operation simple and quick. We would suggest this device if the rails provided stronger support. Otherwise, you may get superior products for about the same price on the market.

Shop Fox W2006

Although it is not designed to be utilised on the left side, the Shop Fox W2006 fence system has long 7-foot rails that allow for a maximum rip of 54 inches to the right of the blade. This fence’s strongest characteristic is that it has one of the broadest rip measurements in the industry. It boasts a straightforward lift-off design for convenience and states to fit the majority of table saws right out of the box. It did fit our saw, however since the bolt holes weren’t lined properly, we had to drill new ones. The rails have a nice-looking, tough-looking black powder coat finish. Unfortunately, because it wasn’t packaged adequately, the one we got had an evident shipping blemish.